Surface Distributor with Insert Clamp

Highest installation convenience, starting from the assembly to the point of the wiring of the PE/N insert clamp; focus on the functionality of all components. 7 line entrances each in the upper, medium and lower connection space considerably simplify the processing in the renovation area.A large wiring space behind the top hat profile rail and an additional lateral wiring space are both a matter of course. In addition, this distributor series includes one plastic rail each in the upper and lower connection space to reduce the strain of the lines introduced. The insert clamps for the PE and N wire connections which are included in delivery are each equipped with 21 plug contacts up to 4 mm² and 5 screwed contacts up to 16 mm² in addition, and are labelled in terms of colour. The both shapely and stable cover includes additional lateral line introduction notches, so the lines can be also laterally introduced without problems. In addition to numerous door systems made of steel plate, or plastics in different colours, you may also use an optional plug lock to lock the doors. Moreover, this series includes the possibility of sealing at two diagonally situated screws. The overall package is rounded by an extensive range of accessories such as label sheets, covering straps, and locking pieces.